How To Flash Stock ROM using SP Flash Tool ? Download SP Flash Tool

What is SP Flash Tool ? How To Use SP Flash Tool ?
What is SP Flash Tool ? How To Use SP Flash Tool ?

What is SP Flash Tool ?

Smart Phone Flash Tool aslo known as SP Flash Tool is a computer application, which mainly helps you to install or upgrade scatter based stock ROM in your mobile. By this tool you can install/Flash custom recovery or any image file (ex-recovery.img). Sometimes you might need to fix unbrick bricked your Android devices and in this case it is helpful too. But note that, this tool works only with Mediatek devices (MTK). Before you proceed make sure which chipset your smart phone does have.

Requirements For SP Flash Tool :

    • Download SP Flash Tool latest version.
    • Download WinRAR or 7zip.
    • A Computer to run this tool.
    • Download scatter based Stock ROM or which file you want to flash for your mobile.
      Note: do not download wrong file, this can be harmful for your device.
    • USB cable to connect your Smart Phone.
      Note: please use a certified USB cable.
    • USB Drivers.
      • You must have to install Mediatek USB VCOM Driver.
        Note: By this driver, your comouter will be able to detect your mobile in switch off mode. If this driver is not installed properly, then your computer will not be able to detect the mobile. Click Here to see the YouTube tutorial how to install VCOM driver. If you use windows 8 or upper version, then keep in mind that Driver Signature Enforcement is disable. ( search on Google or YouTube : How to disable driver signature enforcement.

How To Use SP Flash Tool :

  • Download from above link and unzip it.
  • And unzip your Stock ROM or which file you want to flash using WinRAR or 7zip.
  • Open SP Flash Tool Folder which you recently unzipped and Run as Administrator flash_tool.exe .Run as Administrator flash_tool.exe
  • Then select scatter file. See below how to select scatter file.
    Select Scatter File
  • Then you can change / select or deselect as per your need.
    Note: Do not change anything if you not aware what are you trying to change.
    SP Flash Tool settings
  • Now you are reday to connect your Android Smart Phone to Computer. But before you connect, click on the Download button as shown above image.
    • Switch off your mobile and remove the battery (if you have a removable battery).
    • Connect your phone and press volume key if its not detecting (optional).
  • Then wait for sometime , once your flashing task is completed a pop-up window will appear.
    flashing done pop-up window
  • Done, now you can insert your battery and power on your phone.

2 COMMENTS

  1. Hey I am so glad I found your blog, I really found you by error, while I was searching on Google for something
    else, Nonetheless I am here now and would just like to say many thanks
    for a fantastic post and a all round entertaining blog
    (I also love the theme/design), I don’t have time
    to read through it all at the minute but
    I have book-marked it and also added your RSS feeds, so when I have time I will be back to read a lot more, Please do keep
    up the fantastic

LEAVE A REPLY

Please enter your comment!
Please enter your name here